Adesso Pavilion 15 Technical Information download pdf (Page 101)

3. Lift the battery board (2) to remove it.

Reverse this procedure to install the battery board.

Optical drive connector

NOTE: The optical drive connector and cable are included in the optical drive spare part kit. (See

the Optical drive removal for more information for the spare part kit information.)

Before removing the optical drive connector board, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn

the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet

and then unplugging the AC adapter from the computer.

4. Remove the battery (see

Battery on page 65).

5. Remove the optical drive.

6. Remove the base enclosure and top cover (see

Base enclosure on page 70).

Remove the optical drive connector board:

▲

Disconnect the cable from the ZIF connector (1), and then disconnect the optical drive connector

(2) from the tabs to remove it.

Component replacement procedures 91

1 2 ... 96 97 98 99 100 101 102 103 104 105 106 ... 147 148

No comments

Adesso Pavilion 15 Technical Information Page 101