Adesso CNDV-50MT Service Manual download pdf (Page 92)

90

Chapter 8

Customizing the Audio Source Setting AV

2 Touch 



or 



to adjust front/rear speaker

balance.

Each time you touch 



or 



moves the front/

rear speaker balance towards the front or the

rear.

FRONT:15 — REAR:15 is displayed as the

front/rear speaker balance moves from front

to rear.

FR:00 is the proper setting when only two

speakers are used.

When the rear output setting is REAR SP

SUB. W, you cannot adjust front/rear speaker

balance.

➲ Setting the rear output and subwoofer con-

troller ➞ Page 94

3 Touch 



or 



to adjust left/right speaker

balance.

Each time you touch 



or 



moves the left/

right speaker balance towards the left or the

right.

LEFT:9 — RIGHT:9 is displayed as the left/

right speaker balance moves from left to right.

Adjusting equalizer curves

You can adjust the currently selected equalizer

curve setting as desired. Adjusted equalizer

curve settings are memorized in CUSTOM.

• You can adjust the center frequency, level and

the Q factor (curve characteristics) of each

currently selected curve band (LOW/MID/

HIGH).

• BAND:

You can select the equalizer band.

• LEVEL:

You can select the decibel (dB) level of the

selected EQ.

• FREQUENCY:

You can select which frequency to be set as

the center frequency.

•Q FACTOR:

You can select the details of the curve charac-

teristics.

1 Touch “EQ MENU” in the AUDIO menu.

2 Touch 



or 



to select the equalizer band

to adjust.

Each time you touch 



or 



selects equalizer

bands in the following order:

LOW — MID — HIGH

3 Touch “+” or “–” to adjust the level of the

equalizer band.

Each time you touch “+” or “–” increases or

decreases the level of the equalization band.

+6 — –6 is displayed as the level is increased

or decreased.

4 Touch 



or 



to select the desired fre-

quency.

Touch 



or 



until the desired frequency

appears in the display.

Low: 40 — 80 — 100 — 160 (Hz)

Mid: 200 — 500 — 1k — 2k (Hz)

High: 3.15k — 8k — 10k — 12.5k (Hz)

5 Touch 



or 



to select the desired Q fac-

tor.

Touch 



or 



until the desired Q factor

appears in the display.

2WIDE — 1WIDE — 1NARROW —

2NARROW

❒ If you make adjustments, CUSTOM curve

is updated.

Adjusting bass and treble

Use this function to adjust the bass and treble.

The ability to select the frequency as well as the

level gives you good control over the tonal bal-

ance of the audio.

The bass and treble adjust screens allow you to

reduce or boost frequencies in the following area;

Bass - 40, 63, 100, 160 (Hz)

Treble - 2.5K, 4K, 6.3K, 10K (Hz)

• If EQ-EX is turned on and CUSTOM is

selected as the equalizer curve, you can adjust

bass and treble settings.

➲ Compensating for equalizer curves (EQ-EX)

➞ Page 92

1 Touch “BASS” or “TREBLE” in the

AUDIO menu.

2 Touch 



or 



to select the desired fre-

quency.

3 Touch “+” or “–” to adjust the bass or tre-

ble level.

Each time you touch “+” or “–” increases or

decreases the bass or treble level. +6 — –6 is

displayed as the level is increased or

decreased.

Audio Adjustments

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 138 139

Comments to this Manuals

No comments