Adesso Series 2000 User Manual Page 31

  • Download
  • Add to my manuals
  • Print
  • Page
    / 35
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 30
6
6
31
31
LEAK TESTING
This function enables testing for leaks in pressure systems. The
instrument has a function to automate leak testing in a variety of
applications.
Automatic leak test results are logged, not stored and cannot be
output directly via DigiLink into your DigiLog PC software. To send
leak test results to your PC please use your PC’s Hyper Terminal and
output as to an Epson Printer. When entering pressure values (P1,
P2, P3) you must enter numbers to exactly the same number of
decimal places as full pressure range of the instrument being used.
The number of decimal places required can be seen in the table of
pressure ranges on the back page.
LEAK TESTING
This function enables testing for leaks in pressure systems. The
instrument has a function to automate leak testing in a variety of
applications.
Automatic leak test results are logged, not stored and cannot be
output directly via DigiLink into your DigiLog PC software. To send
leak test results to your PC please use your PC’s Hyper Terminal and
output as to an Epson Printer. When entering pressure values (P1,
P2, P3) you must enter numbers to exactly the same number of
decimal places as full pressure range of the instrument being used.
The number of decimal places required can be seen in the table of
pressure ranges on the back page.
AVERAGING
MAX/MIN
MAX/MIN
Press key (when in mode) and symbol, together
with average reading, will appear on display. Press
to return to mode.
AVERAGING
MAX/MIN
MAX/MIN
Press key (when in mode) and symbol, together
with average reading, will appear on display. Press
to return to mode.
SETTING UP
Press key (when not in mode) and and
symbols will appear on the display. Enter pre-stress pressure level
(if pre-stress pressure function is not required, press key) and the
display will show and symbols. Key in start pressure and
press key and the and symbols will now be displayed.
Key in test time in minutes and seconds (MM.SS), press key and
the and symbols will now be displayed. Key in permissable
change in pressure and press key. The instrument is now ready
to run test and will appear on display.
MAX/MIN
NE
NE P1
P2
NE
NE P3
P1
SETTING UP
Press key (when not in mode) and and
symbols will appear on the display. Enter pre-stress pressure level
(if pre-stress pressure function is not required, press key) and the
display will show and symbols. Key in start pressure and
press key and the and symbols will now be displayed.
Key in test time in minutes and seconds (MM.SS), press key and
the and symbols will now be displayed. Key in permissable
change in pressure and press key. The instrument is now ready
to run test and will appear on display.
MAX/MIN
NE
NE P1
P2
NE
NE P3
P1
PERFORMING A TEST
This test only functions if the symbol is displayed. Apply pressure
to system until changes to (Test Pressure). If a (pre-
stress) pressure has been entered the system must be pressurised
to this level. Bleed system. The display will then clear until test time
has elapsed. or will appear on the display and be
P1
P1 P2 P1
PASS FAIL
PERFORMING A TEST
This test only functions if the symbol is displayed. Apply pressure
to system until changes to (Test Pressure). If a (pre-
stress) pressure has been entered the system must be pressurised
to this level. Bleed system. The display will then clear until test time
has elapsed. or will appear on the display and be
P1
P1 P2 P1
PASS FAIL
X
X
X
X
X
X
OUTPUT OF DATA
1
2
3
This feature will only function if either the or symbols are
displayed.
To view data press key, then and keys. The first stored
reading will be displayed. Press key to view successively stored
readings and any other key to return to normal mode.
To output data to a PC press key, then key.
Ensure PC/Printer is ready to
receive information.
After transmission, the unit will return to normal operation and any
auto logging will stop.
To erase stored data press key, then and keys.
There will be a delay before the unit will accept the key and
symbol will be displayed. This is to help stop accidental erasure.
After erasure, neither or symbols will be displayed. The unit
will return to normal mode.
The selected transmit option will be displayed during transmission.
If after pressing key you do not wish to
delete data, you must turn instrument off and on, then the stored
data will not be lost.
To output data to an Epson compatible printer press key, followed
by key. Printer settings must be as follows: 9600 Baud, 8 data bits,
No Parity, One stop bit, No flow control. It is also possible to print to
Hyper Terminal in your PC in this way.
4
3
OUTPUT OF DATA
1
2
3
This feature will only function if either the or symbols are
displayed.
To view data press key, then and keys. The first stored
reading will be displayed. Press key to view successively stored
readings and any other key to return to normal mode.
To output data to a PC press key, then key.
Ensure PC/Printer is ready to
receive information.
After transmission, the unit will return to normal operation and any
auto logging will stop.
To erase stored data press key, then and keys.
There will be a delay before the unit will accept the key and
symbol will be displayed. This is to help stop accidental erasure.
After erasure, neither or symbols will be displayed. The unit
will return to normal mode.
The selected transmit option will be displayed during transmission.
If after pressing key you do not wish to
delete data, you must turn instrument off and on, then the stored
data will not be lost.
To output data to an Epson compatible printer press key, followed
by key. Printer settings must be as follows: 9600 Baud, 8 data bits,
No Parity, One stop bit, No flow control. It is also possible to print to
Hyper Terminal in your PC in this way.
4
3
FUNZIONI D’AVANGUARDIA
Le seguenti funzioni addizionali sono valide per I modelli 2080P,
2081P, 2082P, 2083P, 2084P, 2085P
FUNZIONI D’AVANGUARDIA
Le seguenti funzioni addizionali sono valide per I modelli 2080P,
2081P, 2082P, 2083P, 2084P, 2085P
ESTENSIONE DISPOSITIVO DI BLOCCAGGIO
A/R
A/R
A/R A/R
Questo strumento ha una estensione di bloccaggio che visualizza le
letture nella migliore risoluzione indicata da sul display. Questo
può venire spento premendo il tasto . Il display usa dunque la
stessa risoluzione per l’intera gamma di pressione. Questo è utile per
evitare che il display passi da una risoluzione all’altra dato che
potrebbero esserci delle fluttuazioni nella pressione. Per cancellare la
modalità premere nuovamente il tasto e sul display apparirà .
ESTENSIONE DISPOSITIVO DI BLOCCAGGIO
A/R
A/R
A/R A/R
Questo strumento ha una estensione di bloccaggio che visualizza le
letture nella migliore risoluzione indicata da sul display. Questo
può venire spento premendo il tasto . Il display usa dunque la
stessa risoluzione per l’intera gamma di pressione. Questo è utile per
evitare che il display passi da una risoluzione all’altra dato che
potrebbero esserci delle fluttuazioni nella pressione. Per cancellare la
modalità premere nuovamente il tasto e sul display apparirà .
REGOLAZIONE DELL’OROLOGIO INTERNO
NEPremere il tasto • ed entrambi i simboli e e le regolazioni
dell’anno e del messe attuale appariranno sul display. Introdurre
mediante tastiera l’anno e il mese, se necessario, e premere il tasto
per accettare. Sul display apparirà la data attuale del mese
prescelto. Introdurre un valore nuovo nel caso fosse necessario e
premere il tasto per accettare.
Sul display apparirà l’ora attuale ed i minuti (orologio a 24 ore).
Introdurre un valore nuovo se necessario e premere il tasto per
accettare. Dopodiché lo strumento ritornerà alla modalità normale.
REGOLAZIONE DELL’OROLOGIO INTERNO
NEPremere il tasto • ed entrambi i simboli e e le regolazioni
dell’anno e del messe attuale appariranno sul display. Introdurre
mediante tastiera l’anno e il mese, se necessario, e premere il tasto
per accettare. Sul display apparirà la data attuale del mese
prescelto. Introdurre un valore nuovo nel caso fosse necessario e
premere il tasto per accettare.
Sul display apparirà l’ora attuale ed i minuti (orologio a 24 ore).
Introdurre un valore nuovo se necessario e premere il tasto per
accettare. Dopodiché lo strumento ritornerà alla modalità normale.
REGISTRAZIONE SU RICHIESTA
NE 0
Questa funzione da la possibilità di memorizzare letture come e
quando lo si richiede.
Quando si è pronti a memorizzare una lettura premere i tasti .
simboli e appariranno sullo display. E possibile immettere
fino a quattro numeri digitali di riferimento, incluso il punto decimale.
Premere il tasto per immettere e memorizzare la lettura. Lo
strumento ritornerà poi alla modalità standard. Tuttavia il simbolo
rimarrà sul display fino a che i dati non vengono cancellati.
Si possono memorizzare, in questo modo, un
massimo di 50 letture.
REGISTRAZIONE SU RICHIESTA
NE 0
Questa funzione da la possibilità di memorizzare letture come e
quando lo si richiede.
Quando si è pronti a memorizzare una lettura premere i tasti .
simboli e appariranno sullo display. E possibile immettere
fino a quattro numeri digitali di riferimento, incluso il punto decimale.
Premere il tasto per immettere e memorizzare la lettura. Lo
strumento ritornerà poi alla modalità standard. Tuttavia il simbolo
rimarrà sul display fino a che i dati non vengono cancellati.
Si possono memorizzare, in questo modo, un
massimo di 50 letture.
REGISTRAZIONE
Questi modelli si avvalgono di funzioni che danno la possibilità
all’utente di conservare e di reperire fino a 250 letture e trasferire il
tutto ad una stampante da PC o compatibile con una stampante
Epsom via collegamento digitale infrarosso.
inoltre offre DigiLog, una raccolta si software adattata al
programma Windows™.
Nota: Alcune delle funzioni potrebbero non essere disponibili durante
l'immissione di dati in selezione Auto e Manual o MAX/MIN. Ciò al
fine di evitare un involontario mescolamento dei parametri mentre si
opera in una delle suddette modalità.
Per riattivare tali funzioni, basterà cancellare eventuali informazioni
memorizzate attenendosi alla sezione "Uscita dati".
REGISTRAZIONE
Questi modelli si avvalgono di funzioni che danno la possibilità
all’utente di conservare e di reperire fino a 250 letture e trasferire il
tutto ad una stampante da PC o compatibile con una stampante
Epsom via collegamento digitale infrarosso Digitron.
Digitron inoltre offre DigiLog, una raccolta si software adattata al
programma Windows™.
Nota: Alcune delle funzioni potrebbero non essere disponibili durante
l'immissione di dati in selezione Auto e Manual o MAX/MIN. Ciò al
fine di evitare un involontario mescolamento dei parametri mentre si
opera in una delle suddette modalità.
Per riattivare tali funzioni, basterà cancellare eventuali informazioni
memorizzate attenendosi alla sezione "Uscita dati".
Premere il tasto per visualizzare la temperatura media a partire
dal momento in cui la modalità MAX/MIN era stata attivata ed il
simbolo apparirà sul display. Premere di nuovo il tasto per
ritornare al display della temperatura effettiva.
NOTA: Per ripristinare la funzione di registrazione MAX/MIN,
premere il pulsante oppure spegnere lo strumento.
NOTA: Alcune dellle funzioni potrebbero non essere disponibili
durante l’immissione di dati in selezione Auto e Manual o MAX/MIN.
Ciò al fine di evitare un involontario mescolamento dei parametri
mentre si opera in una delle suddette modalità. Per riattivare tali
funzioni, basterà cancellare eventuali informazioni memorizzate
attenendosi alla sezione “Uscita dati”.
Premere il tasto per visualizzare la temperatura media a partire
dal momento in cui la modalità MAX/MIN era stata attivata ed il
simbolo apparirà sul display. Premere di nuovo il tasto per
ritornare al display della temperatura effettiva.
NOTA: Per ripristinare la funzione di registrazione MAX/MIN,
premere il pulsante oppure spegnere lo strumento.
NOTA: Alcune dellle funzioni potrebbero non essere disponibili
durante l’immissione di dati in selezione Auto e Manual o MAX/MIN.
Ciò al fine di evitare un involontario mescolamento dei parametri
mentre si opera in una delle suddette modalità. Per riattivare tali
funzioni, basterà cancellare eventuali informazioni memorizzate
attenendosi alla sezione “Uscita dati”.
X
X
X
X
Page view 30
1 2 ... 26 27 28 29 30 31 32 33 34 35

Comments to this Manuals

No comments